Can stainless steel pots be used on gas stoves?

1. Can stainless steel pots be used on gas stoves?

It can be used on a gas stove, but you should pay attention to the thickness. There are many very thin stainless steel pots that will burn black when used directly on the gas stove. This not only affects the appearance, but also affects subsequent use. Food carbonization occurs.

If you use a stainless steel pot on a gas stove, it is best to choose one with a composite bottom design. It is not easy to burn black after being thickened, and it can also be used on an induction cooker.

2. What should you pay attention to when using stainless steel pots?

1. Pay attention to the flame range

Stainless steel pots are different from traditional iron pots. It does not matter if the flame covers the entire pot body. However, stainless steel pots are different. As long as the parts that come into contact with the flames will turn yellow and black, it will greatly affect the appearance and use. Therefore, When using, the flame should not exceed the bottom of the pot, just use medium to low heat for cooking.

There is no need to worry about the cooking effect of food being affected, because its thermal conductivity is very good. Even after turning off the fire, it will still be warm for a long time, and the cooking efficiency of food is still very high. Just ensure that the bottom is heated evenly. It can also prevent food on the bottom of the pot from being burned.

2. Avoid dry burning

When cooking, many people have the habit of turning on the heat first, or not turning off the heat after finishing a dish. In this case, the pot body will be dry-burned, and it is easy for the entire pot to turn yellow.

3. Pay attention to cleaning

If the stainless steel pot has been used for a long time and is not cleaned thoroughly frequently, the bottom of the pot will easily have food sticking to it and causing it to burn. At this time, it must be cleaned to ensure cooking efficiency. In this case, you can soak the stainless steel in water first, and then use bamboo chips or steel wire balls to remove the dirt after soaking it.