Tips for repairing leaks at the bottom of aluminum pots

First . Reasons for water leakage in aluminum pots

Leakage at the bottom of the aluminum pot is caused by long-term use or improper use. The main reasons are as follows:

1. Improper use: The bottom of the aluminum pot is not placed flat or is heated for a long time during use. The bottom temperature of the aluminum pot is too high, causing the aluminum pot to deform and create loopholes.

2. Improper cleaning: excessive cleaning or using hard objects to clean the bottom of the pot can easily damage the bottom of the pot and cause loopholes.

3. Aging and wear: The aluminum material at the bottom of the aluminum pot will slowly age and harden after being heated for a long time, resulting in an increasing number of holes in the aluminum pot.

Second . How to repair leaking aluminum pots

If there is water leakage at the bottom of the aluminum pot, don’t throw it away in a hurry. We can use the following simple methods to repair it.

1. Sealing glue repair method

Method steps:

a. First, clean the bottom of the aluminum pot thoroughly to make sure the surface is clean and free of grease.

b. Completely apply sealing glue around the hole in the bottom of the aluminum pot to seal the hole.

c. Wait for the glue to dry naturally. It is recommended to leave it for more than 24 hours before use.

2. Aluminum foil repair method

Method steps:

a. First, clean the bottom of the aluminum pot thoroughly to make sure the surface is clean and free of grease.

b. Cut the aluminum foil into a shape suitable for the bottom of the aluminum pot, then place it at the leak to seal it.

c. Use a screwdriver or other blunt object to compact the aluminum foil to improve its sealing.

Third . How to avoid leakage at the bottom of aluminum pots

1. Use the aluminum pot correctly. The bottom of the pot must be flat and cannot be heated for a long time.

2. Use soft cleaning tools to clean and avoid using hard objects to damage the bottom of the pot.

3. Before use, check whether there is any damage or holes on the bottom of the aluminum pot, and then use it after confirming that there are no holes.

4. Replace the aluminum pot regularly and pay attention to its use and maintenance to increase its service life.

【Conclusion】

Although leaking water from the bottom of an aluminum pot is very troublesome, don't worry too much. Repairing with sealant or aluminum foil can put your aluminum pan back into use. At the same time, proper use and maintenance of aluminum pots can also better prevent leakage at the bottom of the aluminum pot. Hope this article is helpful to you.